Deliverables
The table below displays all deliverables of the SHARE project. The publicly available deliverables can be downloaded in the Documents section.
# |
Deliverable |
WP |
Lead |
D1.1 |
SHARE Work Plan |
1 |
SED-ETHZ |
D1.2 |
SHARE Consortium Agreement |
1 |
SED-ETHZ |
D1.3a |
Project startup meeting |
7 / 1 |
SED-ETHZ |
D1.4 |
Technical and administrative reports periodically |
1 |
SED-ETHZ |
D1.5 |
Outcome reports of annual General Assembly and Scientific Advisory Board meetings |
1 |
SED-ETHZ |
D2.1 |
Hazard output specifications requirement document, jointly approved with EC8 Committee |
2 |
LNEC |
D6.1 |
OpenSHA design specifications document |
6 |
SED-ETHZ |
D6.2 |
Portal design specifications document |
6 |
BRGM |
D2.2 |
Report on seismic hazard definitions needed for structural design applications |
2 |
UPAV |
D3.1 |
Compilation of existing regional and national seismic source zones |
3 |
GFZ |
D4.1 |
Updated strong ground motion database |
4 |
METU |
D5.1 |
Input specifications for seismic hazard computation |
5 |
SED-ETHZ |
D6.3 |
Web service-oriented architecture providing access to all databases |
6 |
BRGM |
D5.2 |
Structure of the logic tree to be used in seismic hazard computation |
5 |
GFZ |
D1.3b |
Project General Assembly |
7 / 1 |
SED-ETHZ |
D7.1a |
Dissemination e-newsletter |
7 |
UPAV |
D3.2 |
Updated European earthquake catalogue, with homogeneous magnitude calibration |
3 |
GFZ |
D3.3 |
Regional map of Mmax and associated database |
3 |
INGV |
D4.2 |
Regionally adjusted Ground Motion Prediction Equations (GMPE) for Europe |
4 |
METU |
D4.3 |
New site classification scheme and associated site amplification factors |
4 |
LGIT-UJF |
D4.4 |
European Vs30 map derived from surface topography slope and site calibrations |
4 |
LGIT-UJF |
D6.4 |
Initial OpenSHA engine |
4 |
SED-ETHZ |
D6.5 |
Initial Portal implementation |
6 |
SED-ETHZ |
D2.3 |
Recommendations from study on the influence of hazard return period in design codes |
2 |
UPAV |
D2.4 |
Study on minimum hazard levels for explicit structural seismic analysis and design |
2 |
UPAV |
D3.4 |
Database of active faults and seismogenic sources |
3 |
INGV |
D3.5 |
Reference strain rate models for the Euro-Mediterranean region |
3 |
INGV |
D3.6 |
Logic tree of seismic source zones |
3 |
INGV |
D3.7 |
Logic tree of earthquake activity rates |
3 |
NERC-BGS |
D4.5 |
Vector predictions SMD, AI, Fc, and Fb |
4 |
LGIT-UJF |
D6.6 |
Databases of seismogenic zones, Mmax, earthquake activity rates, ground-motion attenuation relations, and associated logic trees |
6 |
SED-ETHZ |
D6.7 |
Operational SHARE Portal |
6 |
SED-ETHZ |
D6.8 |
Validated OpenSHA engine |
6 |
SED-ETHZ |
D5.3 |
Suite of synthetic earthquake catalogues, computed according to different branches of the hazard logic tree |
5 |
GFZ |
D1.3c |
Project General Assembly |
7 / 1 |
SED-ETHZ |
D7.1a |
Brochures for policymakers and stakeholders |
7 |
SED-ETHZ |
D7.1b |
Project electronic newsletter |
7 |
INGV |
D5.4 |
First-round regional seismic hazard assessment including de-aggregation and validation |
5 |
GFZ |
D5.5 |
Final seismic hazard assessment including de-aggregation |
5 |
SED-ETHZ |
D1.3d |
Project General Assembly |
7 / 1 |
SED-ETHZ |
D2.5 |
Seismic loss scenarios for sample European cities and regions |
2 |
AUTH |
D2.6 |
Suggestions for updates to European seismic design regulations |
2 |
UPAV |
D2.7 |
Consensus reference Euro-Mediterranean seismic hazard zonation |
2 |
UPAV |
D7.1c |
Project electronic newsletter |
7 |
INGV |
D7.2b |
Brochures for policymakers and stakeholders |
7 |
UPAV |
D7.3 |
Euro-Mediterranean seismic hazard map |
7 |
SED-ETHZ |